xStack Storage® 8x1GbE iSCSI SAN Array, 16-Bay Rackmount
DSN-4200
SPECIFICATION
DSN-4200
- Eight 1GbE Copper
Drive Bays
- 16, Expandable with DSN-4000 expansion arrays up to 80
Drive Interface Support
- SAS/SATA
System Memory
- 512MB Standard
Cache Memory
- 1GB
Battery Backup for Cache
- Standard (approximately 72 hours on full charge)
Bandwidth
- Up to 850MB/s
Storage Capacity
- Supports 32TB Capacity with 2TB Hard Drives
- Additional DSN-4000 expansion arrays support up to 160TB total capacity
Operating Systems Supported
- Windows Vista® 32-bit & x64 (Ultimate & Enterprise) w/Built-in iSCSI Initiator
- Windows Server® 2003 R2 | SP1 32 & 64-bit (Standard & Enterprise) with v2.07 iSCSI Initiator or later
- Windows Server 2008 Enterprise 32 & 64-bit with Built-in iSCSI Initiator
- Windows XP Pro® 32 & 64-bit with v2.07 iSCSI Initiator or later
- Windows 2000 Advanced Server – No MS iSCSI Initiator support, Qlogic HBA only
- Red Hat® 7.3
- Red Hat Enterprise AS update 5 (64-bit)
- Red Hat Enterprise 5 update 2 (64-bit)
- SuSE® Professional 9.3 32-bit
- SuSE Enterprise Server 10.2 32-bit
- Sun Solaris® 10 build 6/06
- IBM AIX 5L
- Microsoft Hyper-V
- VMware vSphere® 5
- VMware ESX Server® 3.02 & 3.5
- VMware ESX Server® 4.0 & 4.1
- Virtual Iron v4.2
- Citrix XenServer® v4
- Mac OS X® (10.4 & 10.5)
Supported NICs, iSCSI Accelerators and iSCSI HBAs
- Intel® Pro 1000MT & XT [1GbE]
- Intel Pro 10000 CX4 [10GbE]
- Myricom 10G-PCIE-8A-C+E [10GbE]
- Chelsio® S310X-SR-XFP [10GbE]
- Neterion® Xframe® II & Xframe E [10GbE]
- Alacritech® SES2104ET (drivers: SNP 9.1.0.1092 & 7.3.1.0)
- Alacritech SES2102ET (drivers: SNP 9.1.0.1092 & 7.3.1.0)
- QLogic® 4010C, 4052C, & 4062C
Host Interface
- iSCSI Draft 20 Compliant Initiator
Connections
- 1,024 hosts
CHAP Authentication
- Yes
Access Control of Management
- Yes
iSCSI/TCP/IP Full HW Offload
- Yes
Jumbo Frames Support
- Yes
LAG Support (Link Aggregation)
- Up to eight LAGs (Static LAG)
Flow Control
- Enabled by default
RAID Controller
- Integrated in ASIC chip
RAID Support
- RAID Levels 0, 1, 1+0 and 5 (Striped sets, mirrored sets, striped mirrored sets and parity sets)
The maximum number of drive members on a volume is the following:
RAID-1 and RAID-10: 32 HDDs
RAID-5: 17 HDDs
RAID-O: 16 HDDs
Volumes
- 1,024 Virtual Volumes (256 accessible per initiator)
Target Nodes
- 1,024
Online Capacity Expansion
- Yes
Hot Swappable Drives
- Yes
Instant Volume Access
- Yes
Free Space Defragmentation
- Yes
Auto-Detection Failed Drive
- Yes
Auto-Rebuild Spare Drive
- Yes
RAID Level Migration
- Yes
Drive Roaming in Power Off (configured drives are not bay-specific)
- Yes
Micro Rebuilds
- Yes
Embedded IP-Based Management GUI
- Create, manage, expand and monitor storage pool, volumes and RAID
- Event manager to view and persist events
Firmware Field Upgradeable
- Yes
SMI-S Version 1.1
- Yes
Event Log
- Yes
Supply Type
- Dual Redundant Hot-Swappable 450 Watt
Input Voltage
- 90-264 VAC
Input Frequency
- 47-63 Hz
Current
- 7 to 8A (100V); 3.5 to 4A(240V)
Power Factor Correction
- PFC 80PLUS
Operating Temperature
- 41° to 104°F (5° to 40°C)
Storage Temperature
- -4° to 140°F (-20° to 60°C)
Relative Humidity
- 10% to 80% (Non-condensing)
Form Factor
- 3U industry-standard 19-inch rack
Certifications
- CE, FCC Class B, VCCI, BSMI, CB, KCC, C-Tick, UL/cUL, TUV
Weight
- 33 lbs (15 kg)
Dimensions (W x D x H)
- 17.6” x 18.5” x 5.1” (446 x 471mm x 131mm)
Warranty
- 3 year limited (Manufacturers warranty on Hard Drives)
Extended Warranty
- Available (See ordering information below)
Support
- 1 year (9 hours per day / 5 days per week Technical Support)
DSN-4100
- xStack Storage® 4x1GbE iSCSI SAN Array, 16 Bays, 3U
DSN-4200
- xStack Storage® 8x1GbE iSCSI SAN Array, 16 Bays, 3U
DSN-4000
- xStack Storage® iSCSI SAN Expansion Array, 16 Bays, 3U
DSN-210-SW
- SureSync Replication & Synchronization Software
DSN-4100-LW
- Extended Warranty for DSN-4100
DSN-4200-LW
- Extended Warranty for DSN-4200
DSN-4000-LW
- Extended Warranty for DSN-4000