* Note: Power consumption and current overload is higher than the value defined in the SFP MSA
Supported standards
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
transceiver type
SFP (Small Form Pluggable)
connector Type
RJ-45
Automatic identification of MDI / MDIX
Support for automatic determination of polarity MDI / MDIX
You do not need an external crossover cable connection
The data rate
1.000 Mbit / s (according to the standard IEEE 802.3)
When using the 10/100/1000 BASE-T requires a SGMII interface to the system without synchronization.With an interface SERDES, the transceiver will work only on the standard 1000BASE-T.
The type of cable
Twisted pair category 5
Maximum cable length
100 meters
Food
350mA (normal)
400mA (max)
1.3Vt maximum power for the entire permissible range of voltage and temperature *
Input voltage
3.1V (min)
3.3V (typical)
3.5V (maximum)
Reference ground
Maximum voltage
4B
overcurrent
30mA
"Hot" connection causes an increase in the supply current *
